Zyxel PLA-450 Guide De Démarrage Rapide page 11

have the Network Name you selected. With the same
Network Name they are now all on the same network.
5 Add a new device to your network by typing its MAC
Address and DAK Password in the Add New Member
section. The DAK Password is found along with the MAC
Address on a label attached to the device. The DAK
(Device Access Key) is a password to access a powerline
device. Then type a Nickname such as "Mary's room" to
help you identify the device. Click Add. The device's
should appear as Active in the My HomePlug Network
table below.
• If a message MAC address error appears, check the
MAC Address is correctly entered.
• If a message DAK format error appears, check the
DAK Password is correctly entered.
6 Click Scan in the My HomePlug Network table to detect
other HomePlug AV devices.
ENGLISH
11