hager EE610 Mode D'emploi page 15

Technical characteristics
Power around 15 W (75 W luminous energy)
Colour of the light
Luminous flux
Power supply 230 V AC 50 / 60 Hz
Compulsory protection
16A circuit-breaker curve C or curve B
Insulation class
Recommended cable
Connection without screws (Sanvis) terminals
Protection class
Operating temperature
Storage temperature
Detection angle
Forward detection distance
12 m maximum (with remote control)
Twilight threshold setting
Operating duration setting
Accessories Mounting screws and wall plugs
Standards EN 60598-2-5 (07/1999)
EN 60669-2-1 (08/2004)
10
All manuals and user guides at all-guides.com
What to do if...
The lamp does not switch on
4 000 Kelvin • In day/night mode, the twilight setting is set to
1 100 lumen night only mode.
- Readjust.
10 A gG/gl fuse or • Incorrect adjustment of the detection zone.
- Readjust.
II
The lamp does not switch off
U1000R02V3G1.5
• Continuous movement in the detection zone.
- Inspect the detection zone, you may need to
1,5 ... 2,5 mm
2
readjust the zone.
IP55
The lamp continually switches on and off
-25 ... +50 °C
• Animals are moving in the detection zone.
-30 ... +70 °C
- Adjust the sensitivity.
140°
6 m (by default)
5 ... 1000 lux
5 s ... 15 min
å
Usable in all Europe and in Switzerland
Hereby, Hager Controls, declares that this LED lamp
is in compliance with the essential requirements and
other relevant provisions of the low voltage directives
2014/35/EC and CEM 2014/30/EC.
The CE declaration can be consulted on the site:
www.hagergroup.net
z