Publicité
Les langues disponibles
Les langues disponibles
Connecting Components to Your TV
For information on using the different jacks on the back of your TV to hook up other components, see the
following pages.
Note: If you prefer, we can provide you with the name of an Authorized Service Representative who will visit your
home for a fee to install your electronic entertainment system and to instruct you in its operation. For details
about this service, call 1-888-206-3359 or visit www.rca.com.
TV (back panel)
G-LINK
1B
3
1C
VCR
VIDEO
AUDIO
OUT
R
IN
R
TV + VCR
1. Connect your TV to your VCR
A. Connect a coaxial cable to the CABLE/ANTENNA jack on your TV and to the Output Jack on your VCR
(sometimes labeled OUT TO TV).
B. Connect the audio/video cables. Connect audio cables (white and red) to the INPUT1 AUDIO R and L
jacks on the back of the TV and to the Audio Output Jacks on the VCR (sometimes labeled OUT R L).
C. Connect the video cable (yellow) to the INPUT1 VIDEO jack on the back of the TV and to the Video
Output Jack on the VCR.
2. Connect cable or antenna to your VCR
Connect the coaxial cable from your cable outlet, cable box, or antenna to the Input Jack on your VCR
(sometimes labeled IN FROM ANTENNA or IN FROM ANT).
3. Connect the G-LINK cable to the TV
If you haven't already done so, remove the Demo Pin from the G-LINK jack. Then, connect the
G-LINK cable to the G-LINK jack on the TV. Next step, place one of the wands of the G-LINK cable to work
with your VCR (instructions are on page 5).
Note: If you use the S-video cable to connect another component to the TV, you must connect the Audio cables
to the INPUT1 AUDIO R and L jacks, not INPUT 2.
4. Plug in the TV
Chapter 1
All manuals and user guides at all-guides.com
VIDEO
R-AUDIO-L
Y
P
P
B
R
VIDEO
R-AUDIO-L
R
L
IN FROM ANT
L
OUT TO TV
L
Connections & Setup
CABLE/
ANTENNA
1A
CH3
CH4
2
From Cable
or Antenna
GO TO PAGE 5
3
Publicité
