Publicité
Les langues disponibles
Les langues disponibles
Electric Connection
•
The constant current terminal +12V (4) must be connected to a cable that also supplies 12V permanently when
the ignition is off (terminal 30 of the on-board network). This terminal serves to save the user settings, time, etc.
•
The aerial control output (5) supplies a voltage of +12V when the device is switched on. This cable can be used
for the power supply of an electrical aerial, and for the voltage for switching on a vehicle amplifier.
•
The terminal of the ignition +12V (7) must be connected to a cable that is only live with +12V when the ignition
is on (terminal 15 of the on-board networks).
Do not connect this terminal to continuous current, otherwise the on-board battery could be discharged
when the vehicle is parked for a longer period of time.
•
Connect the ground connection (8) with the vehicle body.
Adhesive techniques which become ever more common and painted metal parts impair the electric
conductivity. Therefore not every metal part is a suitable earthing point.
All manuals and user guides at all-guides.com
47
Publicité
