Moulinex LA MOULINETTE DPA141 Mode D'emploi page 9

consistency by operating in pulses instead of
continually.
- Press for the required time you need to get
the chopped consistency you want.
- To obtain a finer consistency, use the spatula
to release food that has become stuck during
chopping and re-distribute evenly inside the
grinder/chopping bowl (B).
- Over time, the blade (C) can become blunt
and will need to be replaced.
A new blade = better performance.
- Let the appliance cool for 2 minutes before
using again. Never use the appliance empty.
Recommended times:
Maximum
Ingredients
Quantity
Parsley 20 g
Onions 250 g
Shallots 150 g
Garlic 140 g
Rusks 50 g
Almonds 250 g
Hazelnuts 200 g
Walnuts 150 g
Parmesan 100 g
Raw meat 330 g
Blender jug function
- Place the blender jug (E) on the work surface
and not onto the motor. All handling
operations must be performed with the
blender jug placed on the work surface, never
fitted to the motor base (A) .
- Put the ingredients to be blended in the
blender jug (E), pouring in liquids first
followed by solids.
- Fit the lid (F) to the blender jug (E). Never
place the blender jug (E) on the motor base
(A) without its lid firmly fitted in place (F).
- With the lid on the blender jug (E), position it
on the motor base (A) and turn until it slots
correctly into position
- Plug in the appliance and start up by turning
the On/Off button (H) to the right to "I"
use it for a maximum of 30 seconds only,
then let the appliance cool for 2 minutes
before using again.
- To stop the appliance, move the On/Off
button (H) to the left to "0".
- Never put your fingers or any other object in
All manuals and user guides at all-guides.com
Maximum
Time
6 sec
12 sec
9 sec
10 sec
5 sec
9 sec
12 sec
10 sec
10 sec
6 sec
(according to model)
.
7
and
7
the blender jug when the appliance is running.
- Do not operate the blender jug without its lid
and measuring cap.
- Do not operate the blender jug empty.
- Wait until the appliance has come to a
complete stop before removing the blender
jug from the motor (A).
CAUTION : Never pour or blend ingredients
into the blender jug if their temperature is
above 80°C (175°F). When blending hot
ingredients, keep your hands away from lid
and cap to avoid any risk of burns.
Vegetable slicer and Juicer functions
Do not process more than 0.5 kg of fruits or
vegetables per operation, and each operation
should not exceed 1½ minute. You can carry
out up to 3 successive operations with a
minimum of 2 minutes pause between each one.
Vegetable cutting function
model)
- Use the vegetable cutting disc (K) to grate
(face A) and slice (face B).
- With the appliance unplugged, position the
vegetable cutter unit (I) on the motor base (A)
and turn it until it slots into place correctly.
- Fit the feed disc (J) and then the vegetable
cutter disc (K) onto the vegetable cutter unit
(I)
.
3
- Lock the lid (L) from left to right on the
vegetable cutter unit (I)
- Place a small bowl or jug under the outlet
spout .
9
- Plug in the appliance.
- Switch on by moving the On/Off button (H) to
the right to "I".
- Caution: If the lid is not fitted correctly, the
On/Off button (H) will not engage and the
appliance will not operate (Moulinex safety
system). For the same reason, you cannot
remove the lid while the vegetable cutter is
running.
- Remove the pusher (M).
- Once the motor has started to run, gently
introduce the vegetables into the funnel of the
lid (L).
- Push the food in with the pusher (M) without
forcing it. Do not use any other utensil for this
purpose. Above all, never push using your
fingers.
- To stop the appliance, turn the On/Off button
(H) back to the left to "0".
5
(according to
.
8