Conceptronic CUPS1200 Mode D'emploi page 17

Deutsch
Installation and Initial Startup

Before installation, please inspect the unit. Be sure that nothing is damaged.
I: Placement & Storage Conditions
Install the UPS in a protected area that is free of excessive dust and has
adequate air flow around the unit, and is free from excessive dust,
corrosive fumes and conductive contaminants. Please place the UPS away
from other units at least 20 cm to avoid interference. Do NOT operate the
UPS where the temperature exceeds 0-40° C and the humidity is over 0-90
% RH.
All manuals and user guides at all-guides.com
3. Installation & Verwendung