Manufacturer Information - Parrot MAMBO Guide D'utilisation

Caution: Exposure to Radio Frequency Radiation
The installer of this radio equipment must ensure that the antenna is located or
pointed such that it does not emit RF field in excess of Health Canada limits for
the general population; consult Safety Code 6, obtainable from Health Canada's
website at http://www.hc-sc.gc.ca
This equipment complies with the FCC RF radiation exposure limits set forth for
an uncontrolled environment. This equipment should be installed and operated
with a minimum distance of 20cm between the radiator and any part of your
body.
DECLARATION OF CONFORMITY IN CANADA
This device complies with the Industry Canada RSS applicable to license-exempt
radio apparatus. Operation is permitted subject to the following two conditions:
(1) the device must not produce interference, and (2) the user of the device must
accept any radio interference encountered, even if the interference is likely to
compromise operations.
This category B digital device is compliant with the NMB-003 standard of Canada.
BATTERY
WARNING: Failure to follow all the instructions may result in serious injury, irre-
parable damage to the battery and may cause a fire, smoke or explosion.
Always check the battery's condition before charging or using it. Replace the battery
if it has been dropped, or in case of odour, overheating, discolouration, deformation
or leakage. Never use anything other than the approved LiPo charger to charge
the battery. Always use a balancing charger for LiPo cells or a LiPo cell balancer. It is
recommended that you do not to use any other charger than the one provided with
the product. Never trickle charge or charge under 2.5 V per cell. The battery tempe-
rature must never exceed 60 °C (140 °F) otherwise the battery could be damaged or
ignite. Never charge on a flammable surface, near flammable products or inside a
vehicle (preferably place the battery in a non-flammable and non-conductive contai-
ner). Never leave the battery unattended during the charging process. Never disas-
semble or modify the housing's wiring, or puncture the cells. Always ensure that the
charger output voltage corresponds to the voltage of the battery. Do not short circuit
the batteries. Never expose the LiPo battery to moisture or direct sunlight, or store
it in a place where temperatures could exceed 60 °C (car in the sun, for example).
Always keep it out of reach of children. Improper battery use may result in a fire,
explosion or other hazard.
The battery terminals should not be allowed to short-circuit. The product
should be connected only to class II appliances which display the symbol.
Use only 6 mm diameter balls (reference MCPLA01357A_Chonggao) sold
by PARROT DRONES. Warning. Do not aim at eyes or face or body part.

MANUFACTURER INFORMATION

The Parrot Mambo is manufactured by: PARROT DRONES SAS - 174 Quai de
Jemmapes - 75010 Paris (France) - Corporate and Trade Register Paris 808 408 074
FCC ID: 2AG6IDELOS3
IC: 21053-DELOS3
17