Télécharger Imprimer la page

Acson G Serie Manuel D'installation page 8

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 19
- Outline And Dimensions
- Safety Precautions
- Installation Diagram
- Installation Of The Outdoor Unit
- Installation Of The Indoor Unit
- Refrigerant Piping
- Electrical Wiring Connection
- Special Precautions When Dealing
with R410A Unit
Before installing the air conditioner unit, please read the following safety precautions carefully.
Installation and maintenance shall be performed by qualified persons who are familiar with local code and
regulation, and experienced with this type of appliance.
All field wiring must be installed in accordance with the national wiring regulation.
Ensure that the rated voltage of the unit corresponds to that of the name plate before commencing wiring work
according to the wiring diagram.
The unit must be GROUNDED to prevent possible hazards due to insulation failure.
All electrical wiring must not touch the refrigerant piping, compressor or any moving parts of the fan motors.
Confirm that the unit has been switched OFF before installing or servicing the unit.
Please take note of the following important points when installing.
• Do not install the unit where leakage of flammable gas may occur.
If gas leaks and accumulates around the unit, it may cause fire ignition.
• Ensure that the drainage piping is connected properly.
If the drainage piping is not connected properly, it may cause water leakage.
• Do not overcharge the unit.
This unit is factory pre-charged. Overcharge will cause over-current or damage to the compressor.
• Ensure that the units panel is closed after service or installation.
Unsecured panels will cause the unit to operate noisily.
• Sharp edges and coil surfaces are potential locations which may cause injury hazards. Avoid from
being in contact with these places.
All manuals and user guides at all-guides.com
CONTENTS
page i-iv
- Vacuuming and Charging
page 2
- Indicator Lights
page 3
- Air Conditioner Unit Operation
page 3
- Operating Range
page 4
- Electrostatic Filter
page 5
- Installation of Unit with O
page 6
- Auto Random Re-Start Function
- Service And Maintenance
page 7
- Troubleshooting
SAFETY PRECAUTIONS
! Warning
! Caution
1-2
page 7
page 8
page 9
page 9
page 10
Therapy Feature
page 10
2
page 11
page 11
page 12

Publicité

loading

Ce manuel est également adapté pour:

Wm07g