Télécharger Imprimer la page

Roadstar CLR-2619 Manuel D'instructions page 7

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 13
-
Do not use abrasive, benzene, thinner or other solvents to clean the surfaces of the unit.
To clean, wipe it will mild non-abrasive detergent solution and clean soft cloth.
-
Never attempt to insert wires, pins or other such objects into the vents or opening of the
unit.
-
Do not place the unit near the light on table lamp. The light will affect the reception of the
infrared sensor function.
WARNINGS
NOTE : Do not connect FM antenna to external antenna.
Dripping warning : The product shall not be exposed to dripping or splashing and that no
objects filled with liquids, such as vases, shall be placed on the product.
Ventilation warning : The normal ventilation of the product shall not be impeded for intended
use.
Disconnect device warning : Main plug is used as the connection, so is should always
The alarm on mode, use the infrared sensor to turn Snooze function
INFRARED SENSOR FUNCTION
1. When the radio is in Off mode, the infrared display time or temperature.
2. When the radio is in On mode, use the infrared sensor to turn Sleep function on
- Hand on top of sensor (6) within 2 seconds to turn the sleep on, the word "Slp" showing
on the LED display. Sleep time from 10-90 minutes. (Refer to "Sleep function" for sleep
time adjustment). Press (9) to cancel Sleep function.
All manuals and user guides at all-guides.com
English
9
3.
onremain ready operate.
English
10
- Hand on top of sensor (6) within 1 second for Snooze off for 9 mintues.
AUDIO IN FUNCTION
Sound will come out automatically if an external audio device is plugged in the AUDIO IN
jack.
SPECIFICATIONS
Frequency Range :
AM 540 - 1611 kHz
FM 87.5 - 108 MHz
Output Power :
350 mW
Speaker Impedance :
8 ohm
Battery Backup :
3V (1 x 3V CR3032 Flat Lithium battery) (for clock)
Power Source :
AC230V ~ 50 Hz, 5 Watts
Specifications subject to change without notice.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
This marking shown on the product or its literature, indicates that it
should not be disposed with other household wastes at the end of its
working life. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, please separate this from
other types of wastes and recycle it responsibly to promote the
sustainable reuse of material resources.
Household users should contact either the retailer where they
purchased this product, or their local government office, for details of
where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product should not be mixed
with other commercial wastes for disposal.

Publicité

loading