Publicité
Les langues disponibles
Les langues disponibles
• Open the Computer; install the battery into the correct posi-
tion.
• Install the Computer into Main Frame.
• Bungee cords: Fix the Bungee Cord to the appropriate loop
holes on the Main Frame:
• The computer will automatically shut off if there is no movement for 4 minutes.
• The computer will automatically turn on when exercise commences.
• All functions will automatically stop and a "STOP" sign will appear on top left corner of the com-
puter when there is no movement for 4 sections. Functions will recommence when you begin to
exercise.
SCAN
TIME
COUNT
REPS/MIN
CAL
FUNCTION BUTTON
Hints
• When it is difficult to see the screen display or there is no display, change the battery.
• If the counter doesn't operate properly, take out the battery and insert it again. If you change the
battery, the count will be changed to "0".
• Reset counter before using. Due to vibrations that occur during transportation, your counter may
not be set to "0" when you start use. This is not an indication of malfunction.
All manuals and user guides at all-guides.com
Assembly
Computer
Automatically scans each function in sequence.
Displays the total time of the workout session starts from 00:00 – 99:59.
Displays the total number of steps taken during the workout session.
Displays the repetitions (or strides) per minute during the workout session.
Displays the calories burned during the workout session. NOTE: This is an
approximate measurement.
To select TIME, COUNT, REPS/MIN, CALORIES To RESET the values to
default. Press 4 Sec to reset the value.
6
Publicité
