Publicité
Les langues disponibles
Les langues disponibles
disconnecting the power cord from the electrical outlet.
• DO NOT use extension cords with your heater. Extension cords can overheat and cause fire.
• DO NOT remove, replace, repair or tamper with the originally-supplied plug.
• NEVER attempt to open or service your heater. Doing so may cause personal injury or
property damage. Should your heater or its power cord malfunction or become damaged,
discontinue operation immediately. Please review the Warranty Policy on Page 6.
• Extreme caution is necessary when your heater is used near children, pets and disabled persons.
Keep your heater out of the reach of children, pets and disabled persons to reduce the risk of
personal injury and electrical shock.
SPECIAL INSTRUCTIONS:
of becoming entangled in or tripping over a longer cord. An extension cord is not
recommended for use with this product, but if one must be used:
− The marked electrical rating must be at least as great as that of the product.
− Arrange the extension cord so that it will not drape over the countertop or tabletop
where it can be tripped over or pulled.
WARNING: This product is equipped with a polarized plug (one blade is wider than
the other blade) to reduce the risk of electrical shock. This is a safety feature. The
plug will fit into a polarized outlet only one way. If you are unable to insert the plug into the
electrical outlet, try reversing the plug. If the plug still does not fit, contact a qualified electrician.
Never use the plug with an extension cord unless you can fully insert the plug into the extension
cord. Do not alter the plug. Do not attempt to defeat the safety purpose of the polarized plug.
Before Use:
1.
Carefully remove your heater from its shipping container.
2.
Ensure that your heater's Power Control Switch is in the 'O' position.
3.
Place your heater on a firm, level surface. Completely uncoil the power cord, and
connect your heater directly into a120 Volt, grounded AC electrical outlet.
CAUTION: Ensure that the plug fits tightly into the electrical outlet. A loose fit can cause
overheating and damage the plug.
NOTE: The power cord and the plug may feel warm during normal operation.
NOTE: The power cord has a polarized plug (with one blade wider than the other) that
will only fit in a polarized outlet one way. If it does not insert easily try reversing the plug.
If it still does not fit contact your electrician to replace your outlet.
DO NOT defeat the safety purpose of the polarized plug.
CAUTION: TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT
A short power supply cord is provided to reduce the risk
FOR HOUSEHOLD USE ONLY
SAVE THESE INSTRUCTIONS
FOR FUTURE REFERENCE
3
Publicité
