Danby DCR045B1BSLDB Mode D'emploi page 8

OPERATING INSTRUCTIONS
DOOR REVERSAL INSTRUCTIONS
If the appliance is placed on its back or side for any length of time
during this process, it must be allowed to remain upright for 6 hours
before plugging it in to avoid damage to the internal components.
1. Remove the upper hinge cover and the upper hinge from the top right
side of the cabinet. Remove the screw hole cover from the top left side
of the cabinet.
2. Remove the hinge hole cover from the top left side of the door and
install it on the top right hand side of the door. Remove the door from
the cabinet.
3. Remove the adjustable foot from the bottom left side of the cabinet.
Remove the lower hinge from the bottom right side of the cabinet.
4. Unscrew the hinge pin and remove it from the hinge.
5. Flip over the lower hinge.
6. Reinstall the hinge pin.
7. Install the lower hinge on the bottom left side of the cabinet. Install the
adjustable foot on the lower right side of the cabinet. Install the door
on the cabinet.
8. Install the upper hinge on the top left side of the cabinet. Install the
screw hole cover on the top right side of the cabinet.
Note: Ensure that the top of the door is level with the top of the cabinet
and that the rubber gasket is making a good seal with the cabinet all the
way around before tightening the screws on the upper hinge.
8