Heitronic 45608 Instructions D'installation Et D'utilisation page 6


Connect the corresponding power lines with the cable connector. Connect the green-yellow protective
conductor first and then the other two cables. The brown (or black) cable is generally the phase
conductor - connect this to the terminal marked with "L". The blue conductor must be connected to the
terminal marked with "N".

Do not bend the cables; make sure that the cables and plugs are not subject to tension or torsional
forces. Protect all cables and insulation against possible damages.

Check proper connection once again.

Switch the building installation's fuse switch back on.
5. Faulty Function

Are power lines properly connected?

Is the circuit breaker switched back on?
6. Technical Data
Article
45608
45609 T-connector
45611
7. Care

Disconnect the entire product from the mains first and let it cool down before cleaning or maintaining the
product.
8. Waste Disposal

The product can be disposed of in the household waste.
All manuals and user guides at all-guides.com
Max. 230 V, 16 A; 3-pole 1.0 - 1.5
Max. 230 V, 16 A; 3-pole 1.0 - 1.5
Max. 230 V, 16 A; 5-pole 1.0 - 1.5
Port Protection type
IP 68, 1m max.
mm²
IP 68, 1m max.
mm²
IP 68, 1m max.
mm²
1/2h
1/2h
1/2h
2 of 2 | 13.12.2018