Vexve AM40 Instructions Et Manuel D'utilisation page 15

For second Heating Circuit there are three
different heating types:
· Radiator heating
· Floor heating
· Constant temperature heating mode to
maintain supply water in adjusted value.
Next You choose the operational direction
of valve and last Control type. Notice that
Control type Room Controlled can be used
when RF Room Unit is in use.
All manuals and user guides at all-guides.com
Control type info
system using curves
· curve adjustment is always needed
· even when room compensation is in use
àla AM20-W patented indoor regulation
algorithm that don't need heating curve
settings at all.
· you can use this control program when
· no curve settings at all
When You have made the choises press exit
button (3) to enter basic screen.
From now on You find Circuit 1 and Circuit 2
basic screens behind the button number 1.
Measured values and Main menu are also
found behind that button.
Outdoor temperature controlled
with RF-Room Unit You must roughly
adjust right curve (+/- 5 degrees)
Indoor temperature controlled system
RF-room unit is in use
13