Broan-NuTone SENSONIC VOICE Voice Control Instructions D'installation page 4

Install grille.
10
1
Connect plug from grille to
wire panel. Squeeze grille
springs and insert into slots in
blower. Push grille up against
ceiling.
Install wall control.
1 11
Note: Location of wall control must be within
20 feet (not obstructed) of grille.
Use one of two methods to attach control:
(1) Mount control to new single-gang electrical
box. (Recommended method.)
(2) Mount control to wall with clearance hole in wall.
Note: When replacing an existing switch with the
new wireless wall control, care must be taken
to properly terminate the existing wiring in a
method approved by local building codes. If you
are unsure, contact a qualifi ed person.
Remove control module, install 2-AAA batteries, and
replace module.
Snap control cover in place. Note: Metallic cover
plates are not recommended.
To pair the wall control, turn on power to voice controlled fan and (within 3 minutes)
press and hold the mute button icon on wall control for at least 5 seconds.
The light on the fan will fl ash when paired.
• If installing more than 1 Sensonic Voice fan in your house, only the fan that
you are attempting to pair with a wall control should be powered. All other
Sensonic Voice fans in your house should not be powered to prevent the wall
control from pairing to multiple fans.
Download the VoiceControl app.
12
1
Download the VoiceControl app from the Apple App
Store or on Google Play. Set the device name in the app.
Additional information.
13
1
For additional information please view:
the Best Practices Guide
Note orientation of tab
and buttons.
or the FAQs.
WIRING DIAGRAM
BLACK
WHITE
GROUND
(bare/green)
120 VAC
LINE IN
WIRING PLATE
4
If grille spring
becomes dislodged
from grille - snap it
back into place as
shown.
1
MUTE
BUTTON
2
RECEPTACLE
(LIGHT)
RECEPTACLE
(FAN)
1108938C