Publicité
Les langues disponibles
Les langues disponibles
How to clean the filter system:
1.
Change the ceramic filter after 1000 L or after 6 months latest. You can
purchase replacement filters at www.buyspareparts.eu
2.
Take the filter system away from the tank cover.
How to clean the transducer:
1) Put 5-10 drops of decalcifying agent or citric acid on the surface of the
transducer; wait for 2-5 minutes.
2) Brush out the surface and then rinse the transducer with water.
How to clean the water basin:
1) Clean the water basin with soft cloth and use a decalcifying agent or citric acid.
2) If the sediment is covered on the security switch, drop the decalcifying agent or citric acid on the scale
and clean it out with the brush.
3) Rinse the water basin with water.
TROUBLE SHOOTING GUIDE
Any trouble found in normal operation; please kindly refer to the following points:
Trouble
Moisture on the floor around
the unit
Power lamp off, does not work
Power
lamp
on,
no
evaporation
Mist smells abnormally
Power lamp on, unit doesn't
work
Insufficient mist evaporation
Abnormal noise
Mist evaporation coming out
from around nozzle
All manuals and user guides at all-guides.com
Possible reasons
Device is set too high, the air
cannot
absorb
the
moisture, it comes to rain down.
No power supply.
mist
No water in water tank.
Plastics might smell during first
applications
Dirty water or long time staying
water.
Too much water in the water
basin.
Too much sediment in the water
basin.
Water is too dirty or water kept
too long in the tank.
Resonant sound in water tank
when water level is too low.
Unit is on an unstable surface
There are apertures between the
nozzle and water tank.
Possible solutions
Reduce moisture evaporation.
expelled
Connect power supply, switch
on.
Fill water into water tank
Take out water tank, open cover,
let it stay 12 hours in cool
position.
Cleaning water tank, fill in clear
water.
Pour some water out from the
water basin; close the cover of
water tank tightly.
Clean transducer and water
basin
Clean water tank, change to
fresh clear water.
Fill water into water tank
Move the unit to a stable flat
surface.
Dip the nozzle in water for a
while and then fix it to the
socket on water tank.
Publicité
