Publicité
Les langues disponibles
Les langues disponibles
WARNING: Risk of burns due to hot parts. Some parts and surfaces are still hot during operation. To
•
reduce the risk of injury, do not touch the active parts during operation
Periodically check this solar kit to make sure that all electrical connection is tight and secure. Also
•
check the mountings (bolts, connections...) are tight and secured.
Inspections must first be carried out after exceptional events (e.g. storm, hail, high snow load, etc.) but
•
also regularly. During these inspections, it should be verified whether the components are safe, intact
and clean.
ONLY clean modules that have been cooled.
•
Do NOT clean the modules with water if there is a risk of freezing.
•
Remove dirt with warm water or a soft cloth. Do NOT scratch dirt. Remove snow and ice without force
•
Leave the substructure free of dirt and debris.
•
Do NOT use abrasive detergents; surfactants, scrapers or cleaning equipment with pressurized water.
•
Do NOT use micro-polar wool or cotton cloths.
Assembly Warnings
Before installation, please check all the components of the solar kit to ensure that there is no
•
transportation or handling damage, which may affect the insulation integrity or safety clearances;
otherwise, it may causesafety hazards.
Install ONLY undamaged modules and components.
•
Do NOT attempt to modify or diassemble the solar kit components in any manner.
•
Assemble the solar kit ONLY per the instructions in this manual. Mount the inverter in such a way that
•
it cannot be touched inadvertently.
The installation location must be freely and safely to get at all times
•
In order to avoid electrical shock or other injury, inspect existing electronic or plumbing installations
•
before screwing the solar kit installation.
Use care when choosing solar kit installation location and adhere to specified cooling requirements.
•
Never install solar kit in environment of little or no air flow, nor dust environment. That may derate the
•
efficiency of the cooling.
Do NOT install solar kit on easily flammable materials and where flammable materials are stored.
•
Do NOT install solar kit on structures constructed of flammable or thermolabile materials.
•
Do NOT install solar kit in close proximity to condiotioned air systems
•
Do NOT mount wall brackets on residential roofs. The brackets are not designed and certified for this
•
type of use.
Mount wall brackets on a sturdy wall to prevent them from being torn off. Do NOT modify the fixings
•
supplied.
Do NOT place supports designed for high ground on a flat roof if they are not screwed to the ground.
•
Do NOT use any other fixing method than those recommended in the installation guide.
•
Falling equipment can cause serious or even fatal injury, never mount the unit on the bracket unless
•
you are sure that the mounting frame is really firmly mounted, after carefully checking.
When installing photovoltaic modules during the day, use opaque materials to cover the photovoltaic
•
modules, otherwise the voltage at the module terminals will be high in the sun, which may cause
danger.
Do NOT install solar kit in windy or wet weather.
•
Use ONLY dry, insulated tools. Do NOT operate with wet hands.
•
Publicité
