Publicité
Les langues disponibles
Les langues disponibles
No power? Make sure that the adaptor is plugged into an electric socket and that the adaptor is plugged
into the connection socket on the dartboard.
No scores? Check whether the game has been set to the 'Settings' mode or to the 'Pause' mode. Then check
whether the sensor elements or the function keys are stuck or jammed.
Stuck sensor elements or stuck function keys? During transportation and even during the normal
operation of the dartboard it can happen that the sensor elements will occasionally get jammed and will no
longer register a hit. In this case a warning signal will be heard, and an indicator will fl ash, indicating a stuck
element. Gentle extraction of the dart from the element, or gently moving the element to and fro using light
fi nger pressure will normally free the element quickly. The game can then be resumed and the scores will
continue from exactly the point when they were interrupted.
Removing broken-off dart tips: Soft tips are defi nitely safer to use, but they do not last forever. Should a
tip break off and remain stuck in the dartboard, try to pull it out very carefully with suitable tweezers. Should a
tip be broken off so short that it does not protrude beyond the surface of the dartboard, it can also be pushed
into the dartboard through the hole. The soft tip cannot damage the electronics located beneath the elements.
For this operation however we strongly recommend you use the soft tip of a dart that is in a perfect condition.
Never push a short broken-off tip through the dartboard using a sharp metal object, because
a metal tip can easily cause damage to the board if it is inserted too deeply into the dartboard. The heavier
the dart, the greater the danger of breaking the tip.
According to the European waste regulation 2002/96/EG this symbol on the
product or on its packaging indicates that this product may not be treated as
household waste. Instead it should be taken to the appropriate collection point
for the recycling of electrical and electronic equipment. By ensuring this product
is disposed of correctly, you will hep prevent potential negative consequen-
ces for the environment and human health, which could otherwise be caused
by inappropriate waste handling of this product. For more detailled informa-
tion about recycling of this product, please contact your local council or your
household waste disposial service.
Manufacturer: Chal-Tec GmbH, Wallstraße 16, 10179 Berlin, Germany.
This product is conform to the following European directives:
2014/30/EU (EMC)
2011/65/EU (RoHS)
All manuals and user guides at all-guides.com
Trouble Shooting
Environment Concerns
Declaration of Conformity
25
Publicité
