TechnoTrade WT290 Mode D'emploi page 13

/ UP or the 12/24 / DOWN button to set the hour of alarm 1.

Press the ALARM 1 button to confirm and the minute digits flash. Press the °C/°F / UP or the
12/24 / DOWN button to set the minute of alarm 1.

Press the ALARM 1 button to confirm and exit the alarm setting.

Use the ALARM 2 button instead of ALARM 1 button in the above setting to set alarm 2.
Notes:

Press and hold the the °C/°F / UP or the 12/24 / DOWN button to speed up setting process.

The setting will automatically return to time display mode, if no button is used for 30 seconds.

Press any button except the SNOOZE button during the active alarm sound to stop the alarm
and the alarm will sound again on the next day at the same time.

Alarm sound duration is 2 minutes and the alarm sound speed is increased during the duration
SNOOZE FUNCTION
When alarm sound is active, press SNOOZE/LIGHT to enter into snooze mode and the Zz icon and
the alarm icon will flash. The alarm will sound again after 5 minutes. Press any button except the
SNOOZE button during the active alarm sound to stop the alarm and the alarm will sound again on the
next day at the same time.
BACKLIGHT
Press the SNOOZE/LIGHT button to turn on backlight for 5 seconds.
TEMPERATURE IN °C OR °F
Under normal display mode, press °C/°F / UP button to set °C or °F as temperature unit.
Note: the temperature range displayed is from 0°C to +50°C
EN 5