TechnoTrade WT290 Mode D'emploi page 12

TIME SETTING

While viewing normal time display, hold the SET button to enter the time setting and the hour
digits flash. Press the °C/°F / UP or the 12/24 / DOWN button to set the hour.

Press the SET button to confirm and the minute digits flash. Press the °C/°F / UP or the 12/24 /
DOWN button to set the minute.

Press the SET button to confirm and the year digits flash. Press the °C/°F / UP or the 12/24 /
DOWN button to set the year.

Press the SET button to confirm and the month digits flash. Press the °C/°F / UP or the 12/24 /
DOWN button to set the month.

Press the SET button to confirm and the date digits flash. Press the °C/°F / UP or the 12/24 /
DOWN button to set the date.

Press the SET button to confirm and the time zone digits flash. Press the °C/°F / UP or the
12/24 / DOWN button to set the time zone value between -12 and +12 hours. For example, +0
is used for Germany and -1 is used for the UK

Press the SET button to confirm and exit the time setting.
Notes:

Time zone icon (ZONE) is shown on the display once a time zone is set (beside 0)

Press and hold the the °C/°F / UP or the 12/24 / DOWN button to speed up setting process.

The setting will automatically return to time display mode, if no button is used for 30 seconds
ALARM SETTINGS

Press the ALARM 1 button to turn on/off alarm 1. The alarm 1 icon is displayed when alarm 1 is
active and is not displayed while alarm 1 is not active.

Hold the ALARM 1 button to enter into alarm 1 setting and the hour digits flash. Press the °C/°F
EN 4