Eads Telecom Connexity M760 Aide-Mémoire page 14

Connections
*Accessories for the M760
The M760 is designed to support optional elements (micro-headset, extension module, analog
options board). Consult your system operator.
Recommendations and safety
Caution – Do not install the equipment in a damp room or near a water outlet. The equipment
must be used at a temperature between 5°C and 45°C.
Telephone connection – This equipment can not be connected to the public network.
This equipment is designed to be installed with a private switching system of M6500 IP PBX
and Succession 6500 ranges.
The voltage on this network is classed TNV1 (Telephone Network Voltage) according to
standard EN 60-950.
CE marking – This certifies the conformity of the equipment with the
regulations which apply in accordance with the directive R&TTE 1999/5/EC.
Maintenance – Use a cloth which has been dampened in slightly soapy water then wipe with
a dry cloth. Your equipment will retain its new appearance if you do not use any solvents or
household cleaning products.
All manuals and user guides at all-guides.com
Description of your M760
Analog options board
connector*
Micro-headset connector*
Handset cord connector
Line cord connector
(under the trap)
Extension module
connector*
3