XUNZEL ZERO+ M Serie Manuel Utilisateur page 7

• Keep equipment out of reach of children and animals.
• Before installing the product, check that all local requirements and regulations
are met.
• The product should be installed by an electrician or qualified personnel. Ensure
that insulated tools and safety equipment such as protective goggles and special
gloves are used.
• Do not perform measurements in wet or damp environments. Measurements out of
range or safety limit could irreversibly damage the measuring instruments.
• The product, with the exception of solar panels, must be installed or stored
indoors, in an environment free of moisture, dust, heat, freezing temperatures or
conductive or flammable contaminants. Do not allow water to enter the equipment.
Ensure that there is sufficient space for ventilation.
• Never use abrasive or corrosive products to clean this product.
• The use of cables with incorrect size and lengths can cause irreversible damage
to the equipment and even fire.
• Risk of falling when working at height. Use adequate fall protection and comply
with safety protocols.
• Caution due to the high weight of the equipment and the risk of crushing hands
and feet.
www.xunzel.com
ATTENTION
CAUTION
PACK ZERO+™ M Series
9