Winix AAPU450-JDE Manuel D'utilisation page 4

CONTROL PANEL
01
02
03
04
01. Check Filter
LED light indicates when it is time to change the filter.
02. Filter Reset Button
After replacing the 360º All-in-One True HEPA Filter, use a small object such as a paper clip, to press and hold the
reset button for at least 5 seconds until the Check Filter light turns off.
03. Auto Mode Button
The LED "Auto" light will indicate when Auto Mode is activated.
• When in Auto Mode, the fan speed is automatically adjusted according to the indoor air quality.
As the indoor air quality improves, the fan speed will automatically decrease.
4
AAPU450-JDE / AAPU450-JWE
05
06
07
08
English