CARE AND MAINTENANCE
Cleaning Your Appliance
Upon installation of your new appliance, it is recommended that it be cleaned thoroughly.
•
Turn the temperature control knob to "0" and then unplug the unit from the wall outlet.
•
Remove all contents.
•
Wash the inside with a damp warm cloth soaked in lukewarm water and baking soda solution.
•
The solution should be about 2 tablespoons of baking soda to a quart of water.
Be sure to keep the door gasket (seal) clean to keep the unit running efficiently.
•
The outside of the beverage cooler should be cleaned with mild detergent and warm water.
•
Dry the interior and exterior with a soft cloth.
•
Vacation Time
Turn the temperature control knob to "0" and then unplug the unit from the wall outlet.
•
Remove all the contents.
•
Clean the appliance.
•
Leave the lid open slightly to avoid possible formation of condensation, mold, or odors.
•
Short vacations: Leave the beverage cooler operating during vacations of less than three weeks.
•
Long vacations: If the beverage cooler will not be used for several months, remove all content and
•
unplug the power cord. Clean and dry the interior thoroughly. To prevent odor and mold growth,
leave the door open slightly: blocking it open if necessary.
Moving Your Appliance
Turn the temperature control knob to "0" and then unplug the unit from the wall outlet.
•
Remove all the contents.
•
Securely tape down all loose items inside your appliance.
•
Tape the doors shut.
•
Energy Saving Tips
The beverage cooler should be located in the coolest area of the room, away from heat producing
•
appliances or heating ducts, and out of the direct sunlight.
Ensure that door is properly closed when the beverage cooler is turned on.
•
All manuals and user guides at all-guides.com
8
EN