NORSKE NMAP004 Manuel D'utilisation page 5

All manuals and user guides at all-guides.com
CUTTING
ADJUSTING THE TABLE EXTENSION
The laminate flooring cutter is equipped
with a sliding extension table (Fig. 7-A)
for supporting longer boards
(41" working length). To adjust, loosen knob
(Fig. 7-B) and extend table to desired length
then tighten knob to lock in place.
Insert material between the cutting blade
A and the base, flush with the aluminum
B
fence; Hold the material with foot then
push handle down to complete a cut.
FIGURE 7
WARNING! Maintain control of the handle.
Do not allow handle to slam back after
making cut.
- 5 -