Installing The Harness - Dunsch DU25428B Mode D'emploi

 Tighten the screws

8.3 Installing the harness

 Adjust the harness hanger in a comfortable position
 Buckle the harness at the hanger
8.4 Replace the metal blade to spool
CAUTION: NEVER use unit if blade is warped or has teeth that are chipped or
missing. Replace a damaged blade immediately.
CAUTION: Always wear heavy-duty work gloves when handling and installing a
blade.
8.4.1 Disassembly metal blade
 Align the hole on the gear box to the slot on the flange washer
 Use the pin to go through the hole and slot, and hold the flange washer
 Loose the nut and remove the metal blade and cup washer
8.4.2 Assembly spool
GB
32