Description (Fig.1); Technical Data - Dunsch DU25428B Mode D'emploi

1. APPLICATION
Depending on the assembled cutting tools, the bush cutter can be used to mow lawns or meadows, and to trim
scrub, shrubs, bushes and very small trees. It is for private use. The device cannot be used for other purposes.
WARNING! For your own safety, read this manual and general safety instructions carefully before using
the appliance. Your power tool should only be passed on together with these instructions.

2. DESCRIPTION (FIG.1)

1.Blade
2.Tube
3.Throttle trigger
4.Switch starter
5.Safety lever
6.Handle bar « U »
7.Hitch of harness
8.Air filter cover
9.Combustible tank cap
10.Petrol tank
11.Air clutch lever
12.Protector
13.Nylon cutting knife
14.Nylon line head
15.Buffer bracket
16.Gear box
17.Guard support
18. Primer bulb

3.TECHNICAL DATA

Model
Displacement (cm
Maximum power (kW)
Fuel ratio
Engine
Type of carburetor
Ignition system
Maximum engine speed(min
Max. rotational speed of the spindle
Idle speed (min
Fuel tank capacity
Unit mass (empty tanks without cutting attachment)
Starter
Clutch
Sound pressure level: ISO 22868.
Noise pressure level [dB(A)] :LpA
Noise power level [dB(A)] :LwA
Model
)
3
)
-1
)
-1
GB
DU25428B
ZMG1E40F
42,7
1,1
Flywheel magneto (C.D.I.)
(min )
-1
0,7
8,4
27
DU25518B
ZMG1E44F
51,7
1,3
Gasoline 40 : Oil 1
Zomax
7500
10000
3000
0.7
8.6
Recoil starter
Centrifugal type
99,2 ; K=3
115