EcoWater Systems ROHD DF Compact+ Manuel D'utilisation Et D'entretien page 66

8. Make sure the assembly is correct and that there are no leaks before mounting the
casing back on.
9. Record the replacement in the maintenance table of this manual.
Replacement procedure for the flow restrictor
1. flow restrictor
2. drainage outlet fitting
3. screws
4. drainage manifold
To replace the flow restrictor,
unscrew the screws (3), remove
the fitting (2).
Remove the restrictor (1) from the
fitting and place in the new fitting.
Attention! Observe the correct
direction, O-ring outside the fitting
(see image).
Re-assemble the screws, fasten
with reversible thread-locker.
FLOW RESTRICTOR TABLE
200
400
500
- 66 -
Pink
Purple
Grey