Télécharger Imprimer la page

Westinghouse BTM-51190 Guide De Démarrage Rapide page 2

Publicité

PAIRING
ON/OFF/AUTO MODE
PROG
TIME
RESET
WARNING
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,and (2)
this device must accept any interference received, including
interference that may cause undesired operation.
INSTRUCTIONS
INITIAL USE: Before initial use, please plug in your timer for
at least 1 hour to charge the internal battery. After the LCD
display appears, your unit will be ready for programming.
RESET: Press the "+" and "-" buttons at the same time to
reset your timer. This will clear all programmed settings.
SET CURRENT TIME
1. Press and hold the "TIME" button to enter the current
time. First, set the day of the week: press "+" or "-"
button to set today's day.
2. Press the "TIME" button to enter the hour setting.
Press the "+" or "-" buttons to set the current hour.
Be sure that AM or PM appears correctly.
3. Press the "TIME" button to enter the minute setting,
Press the "+" or "-" buttons to set the current minute.
4. Press the "TIME" button to finish setting the current
time and return to normal display.
SET MODE: Press & hold the "MODE" button to scroll
between the different mode settings:
DISPLAY
MODE
Digital Timer
Photocell
Countdown
Timer
Digital Timer +
Photocell
SET PROGRAM: After choosing your mode, set the timer
program by holding the "PROG" button for 3 seconds, and
then follow the appropriate section below.
SET PROGRAM: DIGITAL TIMER
1. Set the desired day of the week setting for your timer
using the "+" or "-" button to scroll between choices.
You can select each day individually, Monday to Friday,
Saturday/Sunday, or the entire week. To have your timer
turn On/Off at the set times every day of the week, be
sure to push "+" until all 7 days of the week are lit up.
2. Press "ON/OFF/AUTO" to enter the "PROG 1 ON" hour
setting. Press the "+" or "-" to choose the desired hour
for your timer to turn ON. Be sure to cycle through until
AM or PM appears correctly.
ON
OFF
EXPLANATION
ON/OFF at your exact
programmed times
ON at Dusk or ON immediately,
OFF after 1-12 hours
ON at dusk, OFF at your exact
programmed times
DISPLAY
d
Dusk to Dawn - On at sundown, Off
at sunrise
d:01 to d:12
On at Dusk, Off 1 to 12 hours later
S:01 to S:12
On immediately, Off 1 to 12 hours later
DISPLAY
ON
Continuously ON
OFF
Continuously OFF
AUTO
Timer will turn ON/OFF according
to program settings
EXPLALANATION
EXPLALANATION

Publicité

loading