Publicité
Les langues disponibles
Les langues disponibles
Congratulations on purchasing
your time flash. You have selec-
ted a modern and reliable
system.
The time flash is an electronic
clock with an analogue time
display. It wakes you up with a
flashing light and/or an acoustic
alarm. It is also possible to
connect a vibrating cushion
(special accessory, order no.
A-3303-0).
Standard components
- time flash
- 230 V power supply unit
- Warranty card
Startup
Connect the supplied mains
lead to the socket on the alarm
clock and plug it into a 230 V
power outlet.
Time setting
Carefully pull out the button for
setting the clock/alarm time
and, with the button pulled out,
turn it in the direction of the
arrow until the desired time is
set.
Note: Please do not use exces-
sive force when pulling out the
button for setting the
clock/alarm time!
Setting the wake-up time
Turn the button for setting the
clock/alarm time in the direction
of the arrow until the required
alarm time is set.
Switching on the wake-up
alarm
Switch on the wake-up alarm
using the ON / OFF switch.
Switch not pressed: Wake-up
alarm switched on (green out-
line visible around switch).
Switch pressed: Wake-up alarm
switched off.
Switching on the audible
alarm
Switch on the audible alarm
using the Audible alarm ON /
OFF switch.
Switch not pressed: Audible
alarm switched on (green out-
line visible around switch).
Switch pressed: Audible alarm
switched off.
Snooze Alarm
Press the Light/Snooze button
to suspend a wake-up alarm
which is in progress. The wake-
up alarm is triggered again after
about 5 minutes.
English 7
Publicité
