Barrette 34117732 Instructions D'installation page 4

3.
Build Walls
a. Snap lower privacy panel rail into both posts on
the same wall (Fig.4).
b. Slide/Snap U-Channel onto first tongue and
groove board (Fig.5).
c. Place first tongue and groove board down into
slot on lower privacy panel rail (Fig.6).
d. Continue placing tongue and groove boards until
wall section is complete (Fig.6).
e. Slide/Snap U-channel onto last tongue and
groove board (Fig.6).
f. Snap upper privacy panel rail into both posts on
the same wall (Fig.6).
g. Repeat steps 3A - 3F for remaning walls. If a fifth
wall (#73055225) option is being installed refer to
installation instructions included with fifth wall kit.
4
Fig. 4
Fig. 5
Fig. 6