Product Information; Product Features - buschbeck Maia Instructions De Montage

BEFORE SETTING UP YOUR GARDEN BARBECUE FIREPLACE, MAKE SURE THAT THE
BASE OF CONCRETE, TERRACE TILES OR CONCRETE PAVING IS LEVEL AND FIRM. THE
BASE SHOULD BE AT LEAST 10 CM THICK. MAKE SURE THE BARBECUE IS PLACED AT
A SUFFICIENT DISTANCE FROM FLAMMABLE OR COMBUSTIBLE OBJECTS.
Assembly
All of the parts of the chimney, except for the refrac-
tory concrete base plate 4, the three-part fi reproof
insert 6 and the refractory concrete hood 7, should be
stuck together – at least at points – with the special
adhesive enclosed.
All parts above and including the concrete hood 8
are to be stuck together all-over with the adhesive.
The adhesive take around 24 hours to set completely.
Make sure that there is an approx. 2 cm gap between
the three-part fi reproof insert 6 and the fi replace 4
all round.
The rear wall of the three-part fi reproof insert 6 is
fi xed to the rear wall of the fi replace 5 with two spots
of adhesive.
The hood 8 is mounted with an overhang at the rear
of approx. 1.5 cm.
The cover plate A.1 is mounted so that the front is
fl ush with the three-part fi reproof insert 6 and with
an overhang at the rear resulting from this.
All of the parts of the side table T.1 - T.3 must be stuck
together all over with the enclosed adhesive.
Operation
The garden barbecue fi replace can be heated with
charcoal or firewood – depending on the model!
Please pay special attention to which model is yours.
Heat up your garden barbecue fi replace carefully (small
fl ames) so that no cracks appear at high temperatures.
This is particularly important during damp weather (wet
concrete).
Please use normal charcoal or similar combustible ma-

PRODUCT INFORMATION

terials to heat up your garden barbecue fi replace (max.
5 kg charcoal or fi rewood) along with the intended solid
fi relighters. Large cracks may appear if the maximum
amount of fuel is ignored.
If small cracks appear there is no cause for alarm
and these will not have any negative eff ects on the
safety and function of the barbecue since all parts of
the chimney are reinforced with steel. The formation
of hairline cracks is completely normal and these
do not constitute any grounds for complaints about
the product.
The surface of the garden barbecue fireplace can be
cleaned of algae, for example, with a high-pressure
cleaner.

Product features

Copper is a natural material and can of course tarnish under
the infl uence of the weather. We recommend customary
polishing pastes for cleaning.
The granite cornice plate should be stuck in place well with
the enclosed adhesive. Since granite is a natural product,
hairline cracks may appear when it is heated; these will
not aff ect the function of the barbecue fi replace. Hairline
cracks in the granite cornice pate are not product defects.
Since concrete is a natural product, slight deviations in
the dimensions may appear when the parts dry. These
are within the tolerances and can be compensated with
the enclosed adhesive. They do not constitute grounds
for complaint.
Efflorescence in parts of coloured concrete does not
constitute a ground for complaint but are the result of
a natural process of lime evaporation. The lime is slowly
dissolved through rain and other atmospheric infl uences.
The effl orescence disappears in time by itself.
GB
23