Publicité
STEP 3
1.
Insert 3 wood dowels (C) into wood dowel holes on left side panel (5).
2.
Attach left side panel (5) to front cross bar (4) and bottom board (3) by inserting wood
dowels (C) into wood dowel holes and inserting cam bolts (A) into cam lock holes on front
cross bar (4) and bottom board (3).
3.
Insert 3 cam locks (B) into cam lock holes on front cross bar (4) and bottom board (3), then
rotate clockwise to secure cam bolts in place.
STEP 4
1.
Insert 4 wood dowels (C) into wood dowel holes on top board (1).
2.
Attach top board (1) to left side panel (5) and right side panel (6) by inserting wood dowels (C)
into wood dowel holes and inserting cam bolts (A) into cam lock holes on left side panel (5)
and right side panel (6).
3.
Insert 4 cam locks (B) into cam lock holes on left side panel (5) and right side panel (6), then
rotate clockwise to secure cam bolts in place.
4.
Insert 3 screws (D) through holes on front cross bar (4), then tighten to top board (1).
Publicité
