POWER SMITH MAG-LITH-ION MLAI12C Manuel De L'opérateur page 6

SPECiFiC SAFETY RULES FOR CORDLESS iNFLATOR
WARNiNG:
DO NOT let comfort or familiarity with this tool (gained from
repeated use) replace strict adherence to safety rules. if you use this tool unsafely
or incorrectly, you can suffer serious personal injury!
• The air from the inflator is not safe for breathing.
inflator or from a breathing device connected to the inflator
• For household use only.
minutes ON with 5 minutes OFF.
• Always check the manufacturer's maximum pressure rating for
objects being inflated
bursting.
• Inflator can become hot during use,
• Do not try to repair or modify the inflator or its attachments.
• High pressure air is dangerous.
• Operate only with the accessories included
rating of at least 170 PSI.
• Be aware that this tool is always in an operating condition,
does not have to be plugged into an electrical outlet.
• Always hold the tool firmly in your hands
• Always disconnect battery pack from tool
or off position before any assembly, adjustments or changing of accessories. Following this
instruction will reduce the risk of serious personal injury.
• Do not place battery tools or their batteries near fire or heat.
reduce the risk of explosion and possibly personal injury.
• Never use a battery which has been dropped or received a sharp
blow.
A damaged battery is subject to explosion. Properly dispose of a dropped or damaged
battery immediately.
• Use designated battery pack (PowerSmith MagLithion™ -Model
MLAB12) and charger (PowerSmith™ MagLithion- Model MLACH12)
for this tool.
Use of any other batteries may result in a risk of fire.
WARNiNG:
Read and understand safety and operating instructions for
designated battery and charger before using this tool. This manual contains
important safety and operating instruction for battery charger.
SAVE THESE INSTRUCTIONS
English
All manuals and user guides at all-guides.com
Recommended maximum continuous use at 75 PSI is 2
before using your inflator. Too much air pressure results in a risk of
Do not direct air flow at yourself or others.
6
Never inhale air from this
.
allow inflator to cool 30 minutes before storing.
or air handling parts with a max
before switching the tool "ON".
or place the switch in the locked
because it
This will