Vintage Vinyl VV-SV-TT Manuel D'utilisateur page 3

User Manual
Model: VV-SV-TT
PACKAGE CONTENT
• Turntable (including 45 rpm adapter holder)
• Power Adapter
• User's Manual
BEFORE USE
• Choose a safe location and avoid placing the turntable in direct sunlight or near any heat
source.
• Avoid locations subject to vibrations, excessive dust, cold or humidity.
• Do not open the cabinet as this may result in electrical shock.
• Do not attempt to clean the unit with chemical solvents as this might damage the finishing. A
clean, dry cloth is recommended for cleaning.
• Keep this manual for future reference.
TURNTABLE PARTS & FEATURES
8
7
• 45 RPM adapter holder – Holds the included 45 RPM adapter. When not using the
1
adapter, please place it in this holder.
• Tone arm – The turntable comes with a ready to use pre-balanced tone arm and
2
cartridge. The tone arm can be raised and lowered by hand, or by using the raise / lower
lever . Please note that the tone arm needs to be moved away from resting position (on
3
the arm clip) for the turntable motor to activate if AUTO STOP is ON.
• Lift lever
3
• 33 / 45/78 RPM switch – This switch controls the RPM of the turntable platter.
4
• AUTO STOP ON/OFF switch
5
• Ceramic cartridge
6
• Platter – Place your record here. Please use the 45 RPM adapter, if the spindle is the
7
incorrect size.
• Spindle.
8
• Power ON/OFF and volume control.
9
All manuals and user guides at all-guides.com
English
1
2
3
4
5
6
EN 03