Casals CAG7/115 Mode D'emploi page 7

iately stop before placing it down. The tool insert can jam and
nt the lead to loss of control over the power tool.- Fully unroll
the appliance's power cable before each use.
floor, - Check the position of power cables before commenc- Check the position of power cables before commenc-
eak. ing work ensuring they are well away from the work
area.
et, or - Keep hands and other body parts well away from the
work area whist the tool is in use.
ce. - Keep hands and other body parts well away from the
discs while the angle grinder is in use. Do not attempt
r tan- to remove cut material whilst the angle grinder is in op-
eration or reach underneath for any reason.
- Do not use the appliance if the parts or accessories
nger- are not properly fitted.- Do not use the appliance if the
ignite accessories or consumables attached to it are defec-
tive. Replace them immediately.
with - Use the appliance handle/s, to catch it or move it.
e than - Unplug the appliance from the mains before replacing
any accessory.
at the - Unplug the appliance from the mains when not in use
vice. and before undertaking any cleaning task.
firmly - This appliance is for professional use.
. The - This appliance is intended for adult use. Ensure that
s. this product is not used by the disabled, children or
speed people unused to its handling.
e ap- - This appliance is not a toy. Children should be super-
vised to ensure that they do not play with the appliance.
ol di- - Take special care about discs and tools, they may be
stored fixed on the appliance and used according to the
/ tool manufacturer's instructions.
- Do not use separator or reducing bushings, adapters
speed to fix the discs / tools they are not directly compatible
with the appliance.
when - Do not use cutting discs on deburring operations.
it has - Do not expose to extreme temperatures or strong
r tool magnetism.
- Keep the appliance in a dry, dust-free place, out of
when direct sunlight.
kback - Always check the workpiece before operation and re- Always check the workpiece before operation and re-
move any obstructions such as nails, staples, screws,
parts string, rags, cloths and other debris.
- Before cutting ensure there is a suitable gap below
Work- the workpiece to prevent the disc from touching any
pro- obstacles.
these - Only use the appliance for carrying out dry tasks.
h and - Never rest the appliance into a surface while in use.
- Do not use the appliance on any part of the body of
he bit a person or animal.
- Let the appliance running with no load for 30 sec-
pera- onds in a safe position. If you notice serious vibration
oving or other defects stop the appliance immediately. Then
check the problem and /or proceed as we describe on
mplete Anomalies and Repair clause.
All manuals and user guides at all-guides.com
Product description and Specifications
Description:
A Start-up switch
B Auxiliary handle
C Disc protector
D. Ventilation openings
E Spindle blocking button
F Spindle
H Support plate
I Disc (not included)
J Clamping nut
K Tightening key
L Collard of guard
M Bolt
Instructions for use
Before use:
- Make sure that all the product's packaging has been
removed.
- Before connecting the power cord to the mains power
supply ensure the switch is in the off position.
- Ensure the auxiliary handle is fitted correctly before
use.
- Prepare the appliance according to the function you
wish to use:
Fitting safety devices
Fitting the disc guard (Fig.5)
- Never use the machine without guard. Keep guards
in place.
- The guard should be positioned so the closed side of
the guard points towards the operator.
- Unplug the appliance from the mains.
- Fit the collar of the guard (L) on the flange of the ap-
pliance.
- If the guard doesn't fit in the flange, loosen the bolt
(M).
- Turn the guard to the desired working position.
- Tighten the screw (M) in a clockwise direction.
Fitting the auxiliary handle
- Unplug the appliance from the mains.
Use of the auxiliary handle is obligatory in order to
ensure greater control and safety when handling the
tool. The auxiliary handle (B) must be screwed on to
the right or left side, depending on the type of work to
be carried out.
Fitting the accessories
- Unplug the appliance from the mains.
7