Casals CAG7/115 Mode D'emploi page 3

All manuals and user guides at all-guides.com
English
ANGLE GRINDER
CAG7/115
Dear Customer,
Many thanks for trusting to Casals Professional.
Thanks to its continuous effort, our innovation and the
strictest quality controls, Casals Professional develops
electric Power Tools for the toughest jobs.
GENERAL POWER TOOLS SAFETY WARNING
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and in-
structions may result in electric shock, fire and/or se-
rious injury
Save all warnings and instructions for future ref-
erence
The term "power tool" in the warnings refers to your
mainsoper ated (corded) power tool or battery-operated
(cordless) power tool.
Work Area Safety
- Keep the working area clean and well lit. Cluttered
and dark areas invite accidents
- Do not operate power tools in explosive atmos-
pheres, such as in the presence of flammable liq-
uids, gases or dust. Power tools create sparks which
may ignite the dust or fumes
- Keep children and bystanders away while operat-
ing a power tool. Distractions can cause you to lose
control
Electrical Safety
-Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools. Un-
modified plugs and matching outlets will reduce risk of
electric shock
- Avoid body contact with earthed or grounded sur-
faces, such as pipes, radiators, ranges or refrigera-
tors. There is an increased risk of electric shock if your
body is earthed or grounded
- Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase the risk
of electric shock
- Do not abuse the cord. Never use the cord for car-
rying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk
of electric shock
- When operating the power tool outdoors, use an
extension cord suitable for outdoor use. Use a cord
ORIGINAL instructions
suitable for outdoor use reduces the risk of electric
shock
- If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
electric shock
Personal Safety
- Stay alert, Watch you are doing and use common
sense when operating a power tool. Do not use a
power tool while you are tired or under the influ-
ence of drugs, alcohol or medication. A moment of
inattention while operating power tools may result in
serious personal injury
- Use personal protective equipment. Always wear
eye protection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce
personal injuries.
- Prevent unintentional starting. Ensure the switch
is in the off-position before connecting the power
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your finger on the
switch or energizing power tools that have the switch
on invites accidents
- Remove any adjusting key or wrench before turn-
ing the power tool on. A wrench or a key left attached
to a rotating part of the power tool may result in per-
sonal injury
- Do not overreach. Keep proper footing and bal-
ance at all times. This enables better control of the
power tool in unex pected situations
- Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewellery or long
hair can be caught in moving parts.
- If devices are provided for the connection of dust
extrac tion and collection facilities, ensure these
are connected and properly used. Use of dust col-
lection can reduce dust-related hazards.
Power tool use and care
- Do not force the power tool. Use the correct power
tool for your application. The correct power tool will
do the job better and safer at the rate for which it was
designed.
- Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be
repaired
- Disconnect the plug from the power source and/or
the battery pack from the power tool before making
3