IN HOUSE LED PRODETEC15NR Manuel D'utilisation page 13

3. INSTALLATION
1. Cable connection:
1. Raise the support and open the
buckles.
4. Put the glass back
2. Replace the sensor module:
1. Move up the bracket, and open
buckles
Distribué par / Distribuito da / Distributed by / Vertrieben von NETELEC SRL FR - rue Philemon Laugier - 83400 Hyeres les Palmiers
2. Remove the glass
5. Close the loops
2.Take away the glass
3. Connect cable (3G*1.5RNF)
6. Lock buckles by screws
3.Take off the plastic terminal