Protect KN-8940LA Mode D'emploi Et Notice D'installation page 23

4. DESCRIPTION
1. Handle
2. LED light
3. Light switch
4. Switch (2 or 4 tubes)
5. Charge indicator
6. DC 12V input
7. AC socket (power cord included)
8. Hole for wall mounting
5. HOW TO CHARGE
Before charging or recharging your appliance, please read the
sections Important safety instructions and Warning for the
rechargeable battery carefully.
The device can be recharged in 2 different ways.
- AC charging : Using the included power cord, plug the cable into
the AC socket of the device and plug into the power outlet. The
charge indicator lights red during charging.
- DC 12V charging : You can also recharge the lantern using the
12V DC input (cord not included).
23