Safety Warnings - Marmitek GIGAVIDEO800 Guide Utilisateur

SAFETY WARNINGS

• To prevent short circuits, this product should only be used inside and only in dry spaces. Do not expose the
components to rain or moisture. Do not use the product close to a bath, swimming pool etc.
• Do not expose the components of your systems to extremely high temperatures or bright light sources.
• In case of improper usage or if you have altered and repaired the product yourself, all guarantees expire. Marmitek
does not accept responsibility in the case of improper usage of the product or when the product is used for purposes
other than specified. Marmitek does not accept responsibility for additional damage other than covered by the legal
product responsibility.
• This product is not a toy. Keep out of reach of children.
• Do not open the product (battery panel excepted): the device may contain live parts. The product should only be
repaired or serviced by a qualified expert.
• Keep batteries out of the reach of children. Dispose of batteries as chemical waste. Never use old and new batteries
or different types of batteries together. Remove the batteries when you are not using the system for a longer period of
time. Check the polarity (+/-) of the batteries when inserting them in the product. Wrong positioning can cause an
explosion.
• Only connect the adapter to the mains after checking whether the mains voltage is the same as the values on the
identification tags. Never connect an adapter or power cord when it is damaged. In that case, contact your supplier.
INTRODUCTION
Congratulations on purchasing the Marmitek GigaVideo800! It enables you to connect up to 4 HD devices and
transmit the HD signal wireless to your HDTV or HD-projector. Examples of HD devices are: HD-DVD player, Blu-ray
player, HD-Set top Box, PlayStation3, Xbox 360, etc. The GigaVideo800 supports HD resolutions up to 1080p. The
built-in infrared extension feature enables you to operate the HD devices with your own remote control while hidden in
a closed cabinet!
The Marmitek products are manufactured with the utmost precision and are of high quality. Please read this manual
first and follow the instructions so you can enjoy the possibilities of this product optimally.
SET CONTENTS
1x HDMI Transmitter
1x HDMI Receiver
1x HDMI Remote Control
1x Gold plated HDMI cable
1x IR Sensor Extender cable
GIGAVIDEO 800 TRANSMITTER CONNECTIONS
1. Connect up to 2 HD devices (HDMI OUT) to your GV800 Transmitter (HDMI IN) by HDMI cable.
2. Connect up to 2 HD devices (Y/Pb/Pr OUT) to your GV800 Transmitter (Y/Pb/Pr IN) by green, blue, red-coloured
component video cable.
3. Connect the GV800 Transmitter's "Audio L/R IN" to the HD devices by a red and white coloured audio cable.
4. Connect the supplied power adapter between the DC IN of the GV800 Transmitter and a power outlet.
© MARMITEK
1x IR Blaster Extender cable
2x Energy Saving Switched mode power supply
2x Anchors + Screws
1x User Guide
ENGLISH
3