Adjustment - GF ER 52 Manuel D'utilisation

Installation
13. Put upper cam 5 on the spindle 7.
14. Do electrical connections according to chapter 7 „Electrical Connections".
6.3

Adjustment

1. Slide the upper cam 2 and the lower cam 7 flush against the adjustment plate 8.
2. Put the valve once in the «open» and once in the «closed» position The cams are
hereby correctly adjusted.
3. Screw the transparent cover back on the housing and tighten with the screw 1.
Instruction for use
2
8
7
1
29