Changing the direction of the exhaust duct (optional)
WARNING
Before performing this exhaust installation, disconnect the dryer from its electrical supply. Wear gloves to
protect your hands and arms from sharp edges when working inside the cabinet.
Side venting
A
C
* : 4.9" (125 mm)
DV6900B_SimpleUX_WEB_Vent_EN.indd 31
1. Detach the right (A) or left (B) side knockout as
desired.
B
2. Pull the duct out of the dryer, and then remove the
screw (C) from the duct. Set screw (C) aside. You will
need it in a later step.
3. Cut the duct as shown and keep the cut portion of
D
the duct (D).
English
31
2023/6/29 11:27:10