Publicité
In addition to this manual, the option kit includes:
v CD-RW drive
v Two audio cables
v Four mounting screws
v one IDE cable
v Two bezels
for use with certain computers
3
v Adaptec Easy CD Creator and DirectCD software disc
v Laser Safety Guide for CD-ROMs
v Electrical safety booklet
Contact your place of purchase if an item is missing or damaged. Be sure to
retain your proof of purchase. It might be required to receive warranty service.
See Appendix D for warranty information.
Software description
The Adaptec Easy CD Creator and DirectCD disc contains programs that work
with Windows 95, Windows 98, Windows Me, Windows 2000, and Windows
NT Workstation 4.0. You can use the programs with your CD-RW drive to
create audio and data CDs, to copy CDs, and to make jewel case inserts or CD
labels. This manual will give you basic instructions on using the software so
that you can get started creating CDs. Additional information about the
software and how to use it can be found in the online user's guide on the
software disc.
Before you begin
Read the following information before you start your installation. You must
complete the following steps to install the drive:
1. Determine which IDE port to use and the corresponding configuration
setting.
2. Place or change the configuration jumper on the drive (and possibly make
changes to the configuration jumpers of other devices).
3. Install the drive in a drive bay.
4. Configure the system.
5. Install a device driver.
If you do not understand these procedures or are unsure about your ability to
perform all the procedures described a qualified computer technician to install
the CD-RW drive for you.
3. If you purchased the black option kit, you will receive one black bezel.
1-2
12x8x32 Internal IDE CD-RW Drive: User's Guide
Get other manuals https://www.bkmanuals.com
Publicité
