Safe Handling With Fuels - Nemaxx EB52 Mode D'emploi Original

KEN002EB52

Safe handling with fuels

Fuels and fuel vapours are inflammable and may cause serious injury on the skin
or when inhaled.
Therefore be careful and provide sufficient ventilation when handling with fuels.
• Do not smoke and avoid open flames when fuelling.
• Wear gloves when fuelling.
• Do not fuel in closed rooms.
• Stop the chain saw and allow it to cool down.
• Carefully open the tank cap to allow possible overpressure to relax.
• Avoid spilling of fuel or oil. Clean the device immediately when you have spilled fuel or
oil. Change your clothes immediately when you have spilled fuel or oil on them.
Make sure that no fuel can come into the soil.
• Carefully close the tank cap after fuelling and check that it does not get loose during
operation.
• Check that there is no leakage on the tank cap and fuel lines. If there are leaks this
product may not be started.
• Never use a device with damaged ignition cable and spark plug connector.
• Only transport and store fuels in containers approved and identified for this.
• Keep children away from fuels.
• Do not handle and store fuels close to combustible and highly inflammable materials as
well as sparks and open flames.
• Go away at least three metres from the fuelling place to start the chain saw.
EN
14
v04 • 22.05.2017