Summit Appliance ALR15B Mode D'emploi page 13

Settings Mode
Certain settings on the wine cabinet can only be selected in settings mode.
ºF/ºC Selection
Lightly press and hold the UP key for 5 seconds.
▪
Use the UP and DOWN keys to select the temperature display setting in Fahrenheit or Celsius
▪
degree.
Press the POWER key to confirm your selection.
▪
Press and hold the UP key for 5 seconds to leave settings mode. Otherwise, the appliance exits
▪
settings mode automatically after approximately one minute.
Display Brightness
Lightly press and hold the UP key for 5 seconds and then press the POWER key once.
▪
Use the UP and DOWN keys to select the brightness of the display. The factory default setting is
▪
d1.
d1: Dimmest setting
d2: Medium setting
d3: Brightest setting
Press the POWER key to confirm your selection.
▪
Press and hold the UP key for 5 seconds to leave settings mode. Otherwise, the appliance exits
▪
settings mode automatically after approximately one minute.
Interior Lighting Brightness
Lightly press and hold the UP key for 5 seconds and then press the POWER key twice.
▪
Use the UP and DOWN keys to select the brightness of the interior lighting. The factory default
▪
setting is L3.
L1: Dimmest setting
L2: Medium setting
L3: Brightest setting
Press the POWER key to confirm your selection.
▪
Press and hold the UP key for 5 seconds to leave settings mode. Otherwise, the appliance exits
▪
settings mode automatically after approximately one minute.
Fan Mode
Lightly press and hold the UP key for 5 seconds and then press the POWER key three times.
▪
Use the UP and DOWN keys to select the fan mode. The factory default setting is F0.
▪
F0: Silent mode - Energy saving mode
F1: DynaClima mode - half time
F2: DynaClima mode - full time
Press the POWER key to confirm your selection.
▪
Press and hold the UP key for 5 seconds to leave settings mode. Otherwise, the appliance exits
▪
settings mode automatically after approximately one minute.
Audible Tones
Lightly press and hold the UP key for 5 seconds and then press the POWER key four times.
▪
Use the UP and DOWN keys to select the audible tones. The factory default setting is S1.
▪
S0: Sensor tone ON, alarm tone OFF
S1: Sensor tone ON, alarm tone ON
13