Main Components; Before Initial Start-Up - Metabo KLL 2-20 Mode D'emploi

en
Operating instructions
The Metabo KLL 2-20 is an easy to use crossed line and plumb line laser.
It is self-levelling in the range ± 4.5° and enables levels to be determined
quickly and accurately. The vertically and horizontally projected laser lines
provide exact alignment / working .
The pulsed laser-line enables working over larger distances using a special
laser-line-receiver.
Read the User Manual along with the illustrated portion. Follow the general
instructions on the handling, care and maintenance of the instrument.
Observe the safety instructions on laser beams.

Main components

A1
(1a) On/off button
(1b) ON / OFF switch (for protecting during transport)
(2) LEDs for displaying
(2a) Operating mode ON or READY
(2b) Battery voltag
(3) Exit aperture for the horizontal and vertical laser lines
(4) Plumb line laser outlet
(5) Foot - extendable
(6) Release lever
(7) Battery compartment cover
(8) Protective cover
(9) 1/4" threaded connector for tripod
A2
(10) Magnets
A3
(11) Wall bracket

Before initial start-up :

A1
The warning notice in your language must be clearly affixed on the laser
instrument at the position indicated. The appropriate stickers are enclosed.
This sticker with the warning notice written in the usual language must be
affi xed here in place of the English text !
LA SE R RA DI ATIO N
DO NO T ST AR E IN TO BE AM
LA SE R CL AS S 2
Batteries must be inserted -> changing batteries
8