VITO PRO POWER VITIC750 Mode D'emploi page 28

▪ Make sure that the ventilation slots are not clogged while
operating. Do not place any objects over the slots;
▪ Saw blades can get very hot. Avoid touching them, they
may cause a burn;
▪ Make sure that you don't damage the electrical circuits,
gas and water pipes when operating the equipment in
drywalls or other existing surfaces. Any damage to these
installations can cause fire, explosion, electric shock or
material damage;
▪ When working in enclosed or poorly ventilated spaces
you should use a dust particles extraction/collection
equipment coupled to the jigsaw;
▪ Avoid using the jigsaw on surfaces coated with paints
containing lead or other materials harmful to health.
Any contact or inhalation of dust may cause allergic
reactions and / or breathing disorders.
Before starting cleaning, adjustment, repair, maintenance
task or blade replacement, unplug the power cord.
Replace worn out or damaged parts immediately, so that
the power tool is always in a safe operating condition.
Replace worn out or damaged parts immediately, so that
the power tool is always in a safe operating condition.
Cleaning:
Keep this power tool clean and dry, free from oil, lubricants
or grease. The power tool and its accessories must be
carefully cleaned after each use.
Do not use aggressive cleaning products. These products
may damage plastics and metals, compromising the safe
operation of the power tool.
Maintenance:
Only maintenance works described in this instruction
manual may be carried out; all other works must be
performed by an official dealer.
Use only VITO-approved saw blades or accessories for this
power tool or technically identical parts. Not doing so may
result in personal injuries or damages to the jigsaw. In case
of doubt, lack of knowledge or resources, you should
contact an official dealer.
Your jigsaw should only be serviced by the manufacturer's
internal service personnel, or other qualified personnel,
replacing any necessary parts with original parts.