Evolu7 Link Guide D'utilisation page 56


Call Ringing Times
Call ringing signal is that when switchboard sends regular
pulse signal, telephone will check it to distinguish.
In setup status, press [72], then input ring times [1~9], finally
press [#] to confirmed. Host make a long beep. A "setting
completed, please enter instruction" voice prompt appears.
Factory settings: [2]: Pickup after 2 times ringing
Operating method
Example: host is controlled by remote after receiving 8 ringing
signal
Operation:【72】【8】【#】

Online Enabling
This enables/disables online communication to identify
whether to connect online communication with alarm receipt
center.
In Settings, first enter address code [73] by console keypad, select
Enable/Disable [0/1] between the host and online computer alarm
receipt and press [#] to confirm; voice prompts: set successfully,
please enter command. Factory settings: [0]: disable online
computer communication.
Settings:【73】【X】【#】
"1": enable online computer communication.
"0": disable online computer communication.

Arm/Disarm Operating Notifications
For security, alarm receiving center need to be informed or
not when arm/ disarm
In Settings, first enter address code [74] by console keypad, select
[0/1] to check whether to report to computer alarm receipt with
respect of defense/withdrawal and press [#] to confirm; voice
prompts: set successfully, please enter command. Factory settings:
[0]: do not inform the alarm receiving center.
： 【72】【A】【#】
X indicates：ring times；
56