Smanos RD-20 Mode D'emploi page 3

EN
Pairing to the K1/K2 Hub
Step 1: Pairing RFID reader to the K1/K2 hub
The Reader needs to be paired to the K1/K2 Hub first before use. To
pair this Reader to the K1/K2 Hub, please press the "+" button on
the top right and follow the instructions on the accessories page of
the K1/K2 section in smanos home app.
Once the reader is added, you can check its status (the connection
with the K1/K2 hub and battery status) on the accessories page.
All manuals and user guides at all-guides.com
Step 2: Pairing RFID tag to the K1/K2 hub
The tags included in this kit or purchased separately also needs to
be paired to the K1/K2 Hub first before working with the reader.
To pair the RFID tag, please tap the icon [
press the "+" button at the bottom of RFID Reader page and follow
the instructions.
If you have more than one reader, all tags which have been
successfully paired with the hub through any one reader will appear
on all readers' pages. You can choose specific tags to work on
specific readers by ticking the dot beside tags' names.
EN
] to learn how, then