Publicité
Liens rapides
Double sequential timer 12VDC. It allows two different timings. When activated, the first timing will be carried out,
after which the second will be automatically activated, then returning to the standby state. It has double selectable
time scales through SW1 and SW2 (scale A or B), adjustable time between 0.1 second and 4 minutes with
potentiometers. Allows activation by button or voltage.
It has connections, push button input, Carry OUT communication output, Carry IN communication input and Reset
input.
Functioning : When activating the timer by push button or voltage, the first relay is activated for the set time, after
the time has elapsed it is deactivated and the second relay is activated for the set time, after the time has elapsed it
is deactivated, remaining at rest until a new activation.
Alimentation : Connect the 12 VDC power supply to the POWER terminal, respecting ± polarity. Install a switch for
circuit protection and your own safety, according to CE standard. Before activating the switch, make the rest of the
circuit connections.
To power 230 V AC you can use our recommended FE-103 or FE-300 power supplies.
Timing : To adjust the timing, select time scale with SW 1 and SW 2, adjust times with the potentiometers, select
activation by push button or voltage with JP 5. Once these settings have been selected the timer is ready for use.
SEQUENTIAL TIMER
TEMPORISATEUR SEQUENTIELLE
TEMPORIZADOR SECUENCIAL
TEMPORITZADOR SEQÜENCIAL
www.cebek.com
- sat@fadisel.com
1 seg. to 3 min.
I-27
Technical characteristics
Voltage : 12 V Dc
Medium Consumption : 60 mA
Timing configuration scale A : 0,1 to 24 secs.
Timing configuration scale B : 1 sec to 4 mins.
Activation : Pushbutton or voltaje
Output type : Relay - NO / NC
Max. Output load : 7A ( 2A for inductive loads)
Operating Indicator Led : Yes.
Protection Inversion Polarity : Yes.
Sizes : 72 x 87x 17 mm.
Weight : 60 gr.
Din rail : C-7566
Publicité
Manuels Connexes pour CEBEK I-27
Sommaire des Matières pour CEBEK I-27
- Page 1 SEQUENTIAL TIMER TEMPORISATEUR SEQUENTIELLE TEMPORIZADOR SECUENCIAL TEMPORITZADOR SEQÜENCIAL 1 seg. to 3 min. I-27 Technical characteristics Voltage : 12 V Dc Medium Consumption : 60 mA Timing configuration scale A : 0,1 to 24 secs. Timing configuration scale B : 1 sec to 4 mins.
- Page 2 CHAINING SEVERAL SEQUENTIAL TIMERS : It is possible to connect several sequential timers in series, regardless of whether they are I-27 or I-28. Thus, instead of leaving the circuit at rest at the end of the timing, it will start the next chained timer. To perform this function. Join the Communication Output JP-2 of the first circuit, with the Communication Input JP-1 of the following circuit that you wish to connect in a daisy chain.
- Page 3 ENCADENACIÓN DE VARIOS TEMPORIZADORES SECUENCIALES : Se prevé la posibilidad de conectar varios temporizadores secuenciales en serie, independientemente de si son I-27 o I-28. Así, en lugar de quedar el circuito en reposo al acabar la temporización, iniciará al siguiente temporizador encadenado. Para realizar esta función, una la Salida Comunicación JP- 2 del primer circuito, con la Entrada Comunicación JP-1 del siguiente...
- Page 4 ENCADENACIÓ DE DIVERSOS TEMPORITZADORS SEQÜENCIALS : Es preveu la possibilitat de connectar diversos temporitzadors seqüencials en sèrie, independentment de si són I-27 o I-28. Així, en lloc de quedar el circuit en repòs en acabar la temporització, iniciarà el següent temporitzador encadenat. Per fer aquesta funció, conectar la Sortida Comunicació...
- Page 5 I-27 DEPARTURE CONSIDERATIONS . During the operation of the circuit, and depending on its load, a fluctuation or incorrect operation of the output may occur. If this occurs, install an anti-spark circuit between the two relay contacts used in the connection.
- Page 6 I-27 www.cebek.com - sat@fadisel.com...